Products
-
Assembly Compare 3D
Assembly Compare 3D is an easy to use application for quality checking of the sub assembled or the completed product. It finds the smallest detail and compares it to a reference product. The teach-in process is very simple using one approved reference product (Golden Sample) or a reference CAD model. The software supports different 3D scanners for different sizes of products. The scanners range from 200 mm up to 3.7 meters.
-
Dimension-X
The DIMENSION-X is an optical measuring system for bigger dimensions objects. Typically it is ideal for measuring flat objects such as sheet metal, punched or milled metals. The XY table of the system moves automatically while the high resolution camera scans the object. Then the user sets contour points and makes dimensional measurements between edges, circles angles and curves.
-
Doctor AOI (PCB inspection)
Doctor – AOI is a cost-effective automated optical inspection concept originally developed to respond to the quality control shortcomings of circuit board production lines. Typical scenarios have included for example factories where an extensive AOI system is implemented into one stage but additional inspections are still in demand, say, post-through-hole soldering. A wide selection of available features and the modular concept of Doctor AOI allow forming a custom tailored solution to augment the factory quality control.
-
Modular-X
One of the very special services SANXO offers is to evaluate possible optical solutions or improvements in any type of target process. Under the assessment are, first of all, the feasibility of a machine vision solution, then the performance and the costs of implementation. This initial evaluation we conduct without charge.
-
Calibration board
IMT precision calibration glass.
-
Extension tube set
By using the extension tube larger magnification can be achieved with the same camera and optics. It enables the main lens to get closer to the object. The set consists of the following 5 rings/tubes: 0.5, 1, 5, 10, 20 mm.
-
Laser pointer
The laser pointer is a 1mWatt 3rd class laser device. The laser pointer has an adjustable clamp which enables the user to adjust the proper angle . The switch button of the laser pointer is located on the top of the device so it is very easy to switch on or off. Caution: If the laser beam is pointed to a reflective surface the user of the microscope should wear protection glasses.
-
SANXO – Diffuse flat lightsource
The new SAN-20W white light source provides many outstanding features for the SANXO-Scope HD digital microscope family. Its enclosure is made of powder coated aluminum. There are 170 LEDs providing very strong and evenly distributed light for the digital microscope at 6500K. The light source is dimmable with the knob on the right side of the enclosure. Its ergonomic design enables the user to adjust the angle of the light source.
-
Tilting table – D2
The tilting table can be placed on any iron based surface. The tilting table comes with a 2mm ESD rubber mat cover. The diameter is 200mm.
-
Transport case
Transport case with customized foam arrangement. Outer dimension: 84.6x62x49cm
-
Tunable 1030 (autofocus) lens
By using the Swiss tunable lens, the SANXO-Scope HD gets extra features. The software recognizes the new lens and automatically provides additional functionalities as: Area Focusing, Map Based Focusing, Continuous Focusing, Image Stacking and 3D Imaging.
-
Tunable 1640 (autofocus) lens
By using the new tunable lens the usable range is about 1.5 bigger than with the 1030. Also this lens lets in more light and it can be used with bigger sensor equipped cameras.
METALLURGICAL
microscope
PCB
microscope
CO-EXTRUSION
microscope
JEWELRY
microscope
Contact
Get In Touch